AOVO PRO Electric Scooter Assembly Guide

Step 1

Unfold the kickstand to support the scooter upright. 

Unfold the handle bar stem, then lock it in place upright with the latch.

Step 2

Carefully place the handle bar inside the stem, pushing the wires in at the same time.

Make sure the headlight is facing forward.

Step 3

Insert the screws into the handle bar front and back with the tool provided.

This will secure the handle bar to the frame.  

Step 4

Turn on by holding down the round button on handle bar for 3 to 5 seconds. 

Some electric scooters require a quick kick start for the throttle to work 

Then you are ready to go! 

Latest Products

Leave a comment (all fields required)

Comments will be approved before showing up.